GB/T 18364-2017 Translated English of Chinese Standard. (GBT 18364-2017, GB/T18364-2017, GBT18364-2017): Filling receptacle of LPG vehiclehttps://www.chinesestandard.net, 2018. 3. 30. - 16ÆäÀÌÁö This Standard is applicable to the filling receptacle of LPG vehicle, which uses the LPG vehicle as required in GB 19159 as the fuel, of which the nominal working pressure is 3.0 MPa (The pressure value described in this Standard is gauge pressure) and the working environment temperature is -40 ~65 degree-Celcius. |
¸ñÂ÷
3 | |
Scope | 5 |
Types and model | 6 |
Test methods | 9 |
Inspection rules | 12 |
Marks packing transport and storage | 14 |
Exitfactory document | 15 |
Appendix A Normative Types and dimensions of filling receptacle | 16 |
ÀÚÁÖ ³ª¿À´Â ´Ü¾î ¹× ±¸¹®
ADD the requirement air tightness test Ammonia test Appearance inspection carried out according CARRY out air Collision test Compatibility test contact with LPG dry heat resistance Durability test end of filling environment temperature frequency band Frequency/Hz Acceleration gas vehicle GB/T 528 Rubber hydrostatic pressure strength inlet end insert-type LPG is carried LPG vehicle maximum working temperature meet the requirements method specified MPa pressure difference nominal working pressure One-way valve leak-proof outlet end outlet of filling oxygen aging resistance packing list protective cap provisions of 6.4 receptacle are shown receptacle of LPG requirements of 5.2.2 residual stress salt spray test SEAL the outlet specified in 6.4 Temperature cycling test temperature resistance test tensile strength test is carried test methods Test of dry test of hydrostatic Test of oxygen test piece total mass>3500 kg type and dimension type filling receptacle Type inspection valve leak-proof test vehicle with total vibration resistance test