GB/T 18488.1-2006 Translated English of Chinese Standard. (GBT 18488.1-2006, GB/T18488.1-2006, GBT18488.1-2006): The electrical machines and controllers for electric vehicles - Part 1: General specificationhttps://www.chinesestandard.net, 2014. 10. 7. - 23페이지 This Part specifies the requirements such as duty, quota, environmental conditions, technical requirements, inspection test item and type test of the electrical machines and controllers of electric vehicles. This Part applies to the electrical machines and controllers for electric vehicles. All the items relevant to electrical machines which are not specified in this Part shall comply with GB 755-2000. If there are special requirements, the user and manufacturer may specify them in special technical agreement. All the items relevant to driving controllers which are not specified in this Part shall comply with GB/T 3859.1-1993. If there are special requirements, the user and manufacturer may specify them in special technical agreement. |
자주 나오는 단어 및 구문
Acceleration Basic Urban Circulation Busbar constant load operation Constant speed Continuous-operation Periodic Duty Controllers for Electric cycle includes cycle Load Electric D N F N F N dielectric strength duty is referred Duty S1 duty with electric Electric loss Temperature Electric Vehicles electrical machine rotational electrical machine stator Electromagnetic Compatibility Electromagnetic radiation GB/T hot insulation resistance idt IEC includes a period Inspection Test Items Intermittent Periodic Duty Load duration factor Load Electric loss load rotational inertia Locked-rotor torque machine controller machine rotational inertia machine stator winding machines and controllers maximum operating rotating maximum temperature achieved off-energy and stop-rotation off-machine and off-energy operating rotating speed operation cycles output capacity peed(km/h period of constant period of off-machine Power semiconductor device product standard protection grade QC/T rated voltage rotating shaft rotational inertia Jext rotational inertia JM shaft of electrical specified in product specified in Table Speed reduction Time/s torque and locked-rotor